and let the sun do her magic
BoxMeo is intended to improve the hygienic storage and use only
of non-medical face masks.
When weather conditions are favorable*, the
BoxMeo can be placed in the sun to use heat to reduce infection
risks of a possibly contaminated face masks.
BoxMeo is not intended to be used for any medical
The BoxMeo device is not intended to be used for disinfecting
medical face masks or any medical devices.
FUNCTION 1 -BoxMeo the safe place for your mask.
FUNCTION 2- Inactivating coronaviruses from used masks.
Dry heat is a scientifically proven method for the inactivation of pathogens like coronairuses. Dry heat should be conducted for long enough to ensure that a sufficient reduction in virus concentration has been achieved. Since this is depending on the individual virus concentration please ensure that a sufficient reduction in virus concentration has been achieved. Therefore, apply at minimum the times as stated in the instructions, the longer the better. We emphasize to consider the coronavirus inactivation process using the heat of sunlight only when the weather conditions* are right. When weather conditions are not right, BoxMeo serves only as a hygienic storage case for face masks. *Conditions We emphasize to consider the coronavirus inactivation process using the heat of sunlight only when the weather conditions are right i.e., only if the outside temperature of more than + 20 °C with uninterrupted sunshine, no wind, and no clouds as well as when the box positioned perpendicular to the rays.
FUNCTION 1: Use BoxMeo as a hygienic storage box for your mask to avoid contact with other objects or surfaces. Remove the mask if it is required to be used. Place BoxMeo in your bag or pocket to use later as your personal safe place for your mask.
FUNCTION 2- Fit the mask into BoxMeo, ensuring all parts of the mask are inside BoxMeo and nothing is obstructing the closing of the lid. Place the lid and the base of BoxMeo together and ensure a snug fit. BoxMeo should be placed out of the wind and if possible, on a warm surface. Position BoxMeo in direct sunlight, perpendicular to the rays to focus the intensity of the sun. The thermometer inside BoxMeo shows if the minimum temperature of 60 °C has been reached. If not, close the lid, try to protect BoxMeo from the influence of a cool ambient temperature or wind, and repeat the heating process. If the temperature inside is still less than 60 °C, follow the instructions above or try again when the sun and climate are favorable for the cleaning process. Application time (approximately): 60 minutes at 60 °C*, 50 minutes at 70 °C, 30 minutes at 80 °C (* temperature of the mask).
To guard against injury, basic safety precautions should be observed, including the following: READ, OBSERVE AND FOLLOW ALL SAFETY AND OPERATIONAL INSTRUCTIONS. • DANGER: To avoid burning yourself, special care should be taken when touching or handling the heated BoxMeo • Keep a hot BoxMeo out of the reach of children • BoxMeo should not be placed in/on any electrical heating devices such as microwaves, ovens, or any of nature • Do not use any alcohol-based or flammable solvents/materials on the mask when placed within BoxMeo • BoxMeo is not fire-proof • BoxMeo is used at your own risk and is intended to increase the probability of inactivation of coronaviruses • Following these instructions you can reduce the risk of infections -we cannot guarantee that the mask will be 100% disinfected after the use of BoxMeo • Damaging BoxMeo will reduce the effectiveness to disinfect the mask • Do not use BoxMeo for any other than the intended use. NOTE: We only recommend considering heat as a virus-inactivation method of the facemask, to improve hygienic usage. We do not guarantee disinfection of the facemask nor 100% decontamination. We are not providing protection and using BoxMeo is to your own customer risk. If you want to holistically protect yourself. Consider BoxMeo under the scientific aspect.
Made with Mobirise web themes